If you have an asphalt paving job to do, there are a few things that you can do to make sure that the job goes well and that the paving job is as high-quality as possible. You need to make sure that you set up a good base, have a drainage plan in place, and use the right mixture of asphalt based on your climate.
Set Up a Good Base
The most crucial step to ensure a high-quality asphalt paving job actually takes place before the asphalt is even paved. Before the asphalt is laid down, a good solid base needs to be established. If the base is too thin or too thick, it will have a negative impact on your driveway.
A nice base of gravel needs to be put down under your asphalt driveway. The base needs to be at least a couple of inches thick. A nice solid gravel base will help provide for drainage needs and will help keep your asphalt in place, preventing it from moving around and slipping over time.
Have A Drainage Plan
The next thing you need to do is make sure that you have a drainage plan in place for the driveway. Good drainage is crucial for your driveway. A good drainage plan will help redirect water away from your driveway so that it is not piling up and compromising the integrity of your driveway or causing your driveway to shift over time.
Ideally, your driveway should be raised in the middle and slope slightly to the sides. You should have a drainage ditch that the water will run into. You need to have a plan for water before you put down any asphalt
Use The Right Mixture
Finally, make sure that you use the right mixture of asphalt. If the driveway is being put down somewhere with a cold climate, a different type of asphalt needs to be used. You are going to want to use more water in the asphalt mixture in areas with cold climates.
A chip seal is also popular in areas with cold climates. A chip seal is where a crushed gravel layer is laid down on top of your asphalt before it dries, and is packed down into place. This is a great way to increase the weather resistance of your asphalt driveway.
If you want to have a high-quality looking paving job, you need to make sure that you set up a good base using gravel and establish a drainage plan so water moves away from your driveway. Finally make sure that the right type of asphalt mixture is used based on the local climate. For assistance, work with a company like L. N. Rothberg & Son Inc.